Biggest changeOur wound reconstruction sales representatives call on surgeons doing procedures in limb salvage, trauma, wound reconstruction and burns, and chronic wounds primarily in the inpatient wound care clinic setting. We 7 also have a dedicated surgical reconstruction sales team focused on plastic and reconstructive surgery and hernia procedures with differentiated products. Finally, we have a distributor network focused on biologics.
Biggest changeWe have a specialized sales organization composed of directly employed sales representatives, as well as specialty distributors, organized based upon their call point. Our wound reconstruction sales representatives call on surgeons doing procedures in limb salvage, trauma, wound reconstruction and burns, and chronic wounds primarily in the inpatient wound care clinic setting.
These include the FDA Quality System Regulations which cover the procedures and documentation of the design, testing, production, control, quality assurance, labeling, packaging, sterilization, storage and shipping of medical devices; the FDA's general prohibition against promoting products for unapproved or 'off-label' uses; the Medical Device Reporting regulation, which requires that manufacturers report to the FDA if their device may have caused or contributed to a death or serious injury or malfunctioned in a way that would likely cause or contribute to a death or serious injury if it were to recur; and the Reports of Corrections and Removals regulation, which require manufacturers to report recalls and field corrective actions 13 to the FDA if initiated to reduce a risk to health posed by the device or to remedy a violation of the FD&C Act.
These include the FDA Quality System Regulations which cover the procedures and documentation of the design, testing, production, control, quality assurance, labeling, packaging, sterilization, storage and shipping of medical devices; the FDA’s general prohibition against promoting products for unapproved or ‘off-label’ uses; the Medical Device Reporting regulation, which requires that manufacturers report to the FDA if their device may have caused or contributed to a death or serious injury or malfunctioned in a way that would likely cause or contribute to a death or serious injury if it were to recur; and the Reports of Corrections and Removals regulation, which require manufacturers to report recalls and field corrective actions to the FDA if initiated to reduce a risk to health posed by the device or to remedy a violation of the FD&C Act.
Human Cells, Tissues and Cellular and Tissue-Based Products Integra, through its wholly-owned subsidiary BioD LLC (“BioD”), is involved with the recovery, processing, storage, transportation and distribution of donated amniotic tissue. The FDA has specific regulations governing HCT/Ps. An HCT/P is a product containing, or consisting of, human cells or tissue intended for transplantation into a human patient.
Human Cells, Tissues and Cellular and Tissue-Based Products Integra, through its wholly-owned subsidiary BioD LLC (“BioD”), is involved with the recovery, processing, storage, transportation and distribution of donated amniotic tissue. The FDA has specific regulations governing HCT/Ps. An HCT/P is a 11 product containing, or consisting of, human cells or tissue intended for transplantation into a human patient.
Moreover, after clearance/approval is given, if the product is shown to be hazardous or defective, the FDA and foreign regulatory agencies have the power to withdraw the clearance or approval, as the case may be, or require us to change the device, its manufacturing process or its labeling, to supply additional proof of its safety and effectiveness or to recall, repair, 11 replace or refund the cost of the medical device.
Moreover, after clearance/approval is given, if the product is shown to be hazardous or defective, the FDA and foreign regulatory agencies have the power to withdraw the clearance or approval, as the case may be, or require us to change the device, its manufacturing process or its labeling, to supply additional proof of its safety and effectiveness or to recall, repair, replace or refund the cost of the medical device.
Significant new regulations, a ban of our products, or a movement away from bovine-derived products because of an outbreak of BSE could have a material, adverse effect on our current business or our ability to expand our business. See “Item 1A. Risk Factors – Risks Related to our Regulatory Environment " of this Annual Report on Form 10-K.
Significant new regulations, a ban of our products, or a movement away from bovine-derived products because of an outbreak of BSE could have a material, adverse effect on our current business or our ability to expand our business. See “Item 1A. Risk Factors – Risks Related to our Regulatory Environment ” of this Annual Report on Form 10-K.
Investors and others should note that we announce material financial information to our investors using our investor relations website (investor.integralife.com), SEC filings, press releases, public conference calls and webcasts. We use these channels as well as social media to communicate with the public about our Company, our services and other issues.
Investors and others should note that we announce material financial information to our investors using our investor relations website (investor.integralife.com), SEC filings, press releases, public conference calls and webcasts. We use these channels as 19 well as social media to communicate with the public about our Company, our services and other issues.
Although we continuously strive to maintain full compliance with respect to all applicable global 14 environmental, health and safety laws and regulations, we could incur substantial costs to fully comply with future laws and regulations, and our operations, business or assets may be negatively affected. Furthermore, global environmental, health and safety compliance is an ongoing process.
Although we continuously strive to maintain full compliance with respect to all applicable global environmental, health and safety laws and regulations, we could incur substantial costs to fully comply with future laws and regulations, and our operations, business or assets may be negatively affected. Furthermore, global environmental, health and safety compliance is an ongoing process.
Tissue Technologies Our TT segment focuses on three main areas: complex wound surgery, surgical reconstruction, and peripheral nerve repair and consists of five unique regenerative technology areas - highly engineered bovine collagen, bovine dermis, porcine urinary bladder, human amniotic tissue, and resorbable synthetic mesh.
Tissue Technologies 7 Our TT segment focuses on three main areas: complex wound surgery, surgical reconstruction, and peripheral nerve repair and consists of five unique regenerative technology areas - highly engineered bovine collagen, bovine dermis, porcine urinary bladder, human amniotic tissue, and resorbable synthetic mesh.
We apply our core competency in regenerative technology to innovate products for neurosurgical, wound applications, plastic surgery, and reconstructive surgery and we have extensive R&D development programs for our core platforms of electromechanical technologies. Additionally, we conduct products and clinical studies to generate efficacy and health economic evidence. Regenerative Technologies .
We apply our core competency in regenerative technology to innovate products for neurosurgical, wound applications, plastic surgery, and reconstructive surgery and we have extensive R&D development programs for our core platforms of electromechanical technologies. Additionally, we conduct projects and clinical studies to generate efficacy and health economic evidence. Regenerative Technologies .
With thousands of surgical instrument products, including specialty surgical instruments, we call on the central sterile processing unit of hospitals and acute care surgical centers. Additionally, through a strong U.S. distribution model, we can serve the needs of hundreds of medical offices.
With thousands of surgical instrument products, including specialty surgical instruments, we call on the central sterile processing unit of hospitals and acute care surgical centers. Additionally, through a strong U.S. distribution model, we can serve the needs of medical offices.
Such actions may disrupt or delay sales of our products or services or result in restrictions on our distribution and sales of products or services that may materially impact our business Environmental Health and Safety . Our research, development and manufacturing processes involve the controlled use of certain hazardous materials.
Such actions may disrupt or delay 16 sales of our products or services or result in restrictions on our distribution and sales of products or services that may materially impact our business. Environmental Health and Safety . Our research, development and manufacturing processes involve the controlled use of certain hazardous materials.
Several new products were introduced in select international markets in 2023, including MicroMatrix® and Certas Plus® Programmable Valve which were launched in Europe, and CUSA Clarity Laparoscopic tip which was launched in Australia, 6 New Zealand, Japan, Canada, South Africa and Israel.
Several new products were introduced in select international markets in 2023 and 2024, including MicroMatrix® and Certas Plus® Programmable Valve, which were launched in Europe, and CUSA Clarity laparoscopic tip, 6 which was launched in Australia, New Zealand, Japan, Canada, South Africa and Israel.
In general, our first quarter usually has lower revenues than the preceding fourth quarter, the second and third quarters have higher revenues than the first quarter, and the fourth quarter revenues are the highest in the year. The main exceptions to this pattern occur because of material acquisitions.
In general, our first quarter usually has lower revenues than the preceding fourth quarter, the second and third quarters have higher revenues than the first 10 quarter, and the fourth quarter revenues are the highest in the year. The main exceptions to this pattern occur because of material acquisitions.
Similar anti-bribery laws exist in many of the countries in which we sell our products outside the U.S., as well as the United States Foreign Corrupt Practices Act (the “FCPA”) which addresses the activities of U.S. companies in foreign markets.
Anti-bribery laws exist in many of the countries in which we sell our products outside the U.S., as well as the United States Foreign Corrupt Practices Act (the “FCPA”) which addresses the activities of U.S. companies in foreign markets.
We seek ways to develop products and technologies that impact the lives of patients, starting with the journey that a patient takes from diagnosis and treatment planning to surgery and postoperative care.
We seek ways to develop and acquire products and technologies that impact the lives of patients, starting with the journey that a patient takes from diagnosis and treatment planning to surgery and postoperative care.
Examples of HCTPs include bone, ligament, skin and cornea. Some HCT/Ps fall within the definition of a biological product, medical device or drug regulated under the FD&C Act.
Examples of HCT/Ps include bone, ligament, skin and cornea. Some HCT/Ps fall within the definition of a biological product, medical device or drug regulated under the FD&C Act.
Eligibility for non-salary benefits such as salary continuance, life insurance, health insurance, and similar benefits, follows local regulations and practices. We are a pay-for-performance company committed to fair pay.
Eligibility for non-salary benefits such as salary continuance, life insurance, health insurance, and similar benefits, follows local regulations and practices. 18 We are a pay-for-performance company committed to fair pay.
The extended laparoscopic tip was launched in the U.S. to enhance laparoscopic liver procedures. In addition, a single-sided bone tip received 510(k) clearance from the FDA. Commercial launch was completed successfully in early 2023. In August 2023, we launched a modified 23 kHz CUSA Electrosurgery Module (CEM) for Clarity handpieces that can be used with additional electrosurgery generators.
The extended laparoscopic tip was launched in the U.S. to enhance laparoscopic liver procedures. In addition, a single-sided bone tip received 510(k) clearance from the FDA. Commercial launch was completed successfully in early 2023. In August 2023, we launched a modified 23 kHz CUSA® Electrosurgery Module (“CEM”) for Clarity handpieces that can be used with additional electrosurgery generators.
We are the world leader in neurosurgery and one of the top three providers in instruments used in precision, specialty, and general surgical procedures. Our TT segment generates about one-third of our overall revenue and focuses on three main areas: complex wound surgery, surgical reconstruction, and peripheral nerve repair.
We are the world leader in neurosurgery and one of the top three providers in the U.S. in instruments used in precision, specialty, and general surgical procedures. Our TT segment generates about one-third of our overall revenue and focuses on three main areas: complex wound surgery, surgical reconstruction, and peripheral nerve repair.
The CSS business consists of a broad portfolio of market-leading brands, such as Codman ® , DuraGen ® , DuraSeal ® , CUSA ® , Mayfield ® ,Bactiseal ® , and Certas ® Plus,which are used for the management of multiple disease states, including brain tumors, traumatic brain injury, hydrocephalus and other neurological conditions.
The CSS neurosurgical business consists of a broad portfolio of market-leading brands, such as Codman®, DuraGen®, DuraSeal®, CUSA®, CereLink®, Mayfield®, Bactiseal®, and Certas® Plus, which are used for the management of multiple disease states, including brain tumors, traumatic brain injury, hydrocephalus and other neurological conditions.
We have key manufacturing and research facilities located in California, Indiana, Maryland, Massachusetts, New Jersey, Ohio, Puerto Rico, Tennessee, Utah, France, Germany, Ireland and Switzerland. We source most of our handheld surgical instruments and dural sealant products through specialized third-party vendors.
We have key manufacturing and research facilities located in California, Maryland, Massachusetts, New Jersey, Ohio, Puerto Rico, Tennessee, Utah, France, Germany, Ireland, Israel and Switzerland. We source most of our handheld surgical instruments and dural sealant products through specialized third-party vendors.
These regulations govern the introduction of new medical devices and HCT/Ps, the observance of certain standards with respect to the design, manufacture, testing, labeling, promotion and sales of the products, the maintenance of certain records, the ability to track devices, the reporting of potential product defects, the import and export of products, and other matters.
These regulations govern the introduction of new medical devices and HCT/Ps, the observance of certain standards with respect to the design, manufacture, testing, labeling, promotion and sales of the products, the maintenance of certain records, the ability to track devices, the reporting of adverse affects and potential product defects, the import and export of products, and other matters.
Risk Factors – We are exposed to a variety of risks relating to our international sales and operations ” of this Annual Report on Form 10-K for further details. Import-export . Our international operations subject us to laws regarding sanctioned countries, entities and persons, customs, and import-export.
Risk Factors – We are exposed to a variety of risks relating to our international sales and operations” of this Annual Report on Form 10-K for further details. Import-export . Our international operations subject us to laws regarding sanctioned countries, entities and persons, customs, and import-export.
The World Health Organization classifies different types of cattle tissue for relative risk of BSE transmission. Deep flexor tendon and fetal bovine skin are in the lowest-risk category for BSE transmission, and therefore considered to have a negligible risk of containing the agent that causes BSE.
The World Health Organization classifies different types of cattle tissue for relative risk of BSE transmission. Deep flexor tendon and fetal bovine dermis are in the lowest-risk category for BSE transmission, and therefore considered to have a negligible risk of containing the agent that causes BSE.
We have expanded our base regenerative technology business to include surgical instruments, neurosurgical products and advanced wound care through global acquisitions and product development to meet the evolving needs of our customers and enhance patient care. Integra products are sold in more than 130 countries through a direct sales force as well as distributors and wholesalers.
We have expanded our base regenerative technology business to include ENT, surgical instruments, neurosurgical products and advanced wound care through global acquisitions and product development to meet the evolving needs of our customers and enhance patient care. Integra products are sold in more than 120 countries through a direct sales force as well as distributors and wholesalers.
In particular, the collagen used in the products that we manufacture is derived from the deep flexor tendon of cattle less than 24-months old from New Zealand, a country that has never had a reported case of bovine spongiform encephalopathy ("BSE") (otherwise known as mad cow disease), from the U.S. or from fetal bovine dermis.
In particular, the collagen used in the products that we manufacture is derived from the deep flexor tendon of cattle less than 24-months old or from fetal bovine dermis from New Zealand, a country that has never had a reported case of bovine spongiform encephalopathy (“BSE”) (otherwise known as mad cow disease), and from the U.S.
We continue to work with several instrument partners to bring new surgical instrument platforms to the market. Throughout 2023 we also continued to advance the early-stage technology platforms we acquired in 2019. Through the acquisition of Arkis Biosciences, Inc.
We continue to work with several instrument partners to bring new surgical instrument platforms to the market. We also continued to advance the early-stage technology platforms we acquired in 2019. Through the acquisition of Arkis Biosciences, Inc.
We manufacture and sell medical technologies and products in two reportable business segments: Codman Specialty Surgical ("CSS") and Tissue Technologies ("TT"). The CSS segment, which represents approximately two-thirds of our total revenue, consists of market-leading technologies and instrumentation used for a wide range of specialties, such as neurosurgery, neurocritical care and otolaryngology.
We manufacture and sell medical technologies and products in two reportable business segments: Codman Specialty Surgical (“CSS”) and Tissue Technologies (“TT”). The CSS segment, which represents approximately two-thirds of our total revenue, consists of market-leading technologies and instrumentation used for a wide range of specialties, such as neurosurgery, neurocritical care and otolaryngology.
Our lighting franchise is among the most dynamic in the industry. We are focused on the development of core clinical applications in our electromechanical technologies portfolio. We continue to update our CUSA Clarity platform by incorporating new ultrasonic handpiece and integrated electrosurgical capabilities. In 2022, we made progress to several enhancements to our CUSA Clarity Tissue Ablation System.
Our lighting franchise is among the most dynamic in the industry. We are focused on the development of core clinical applications in our electromechanical technologies portfolio. We continue to update our CUSA® Clarity platform by incorporating new ultrasonic handpiece and integrated electrosurgical capabilities. We have made several enhancements to our CUSA® Clarity Tissue Ablation System.
These unique product designs are used for neurosurgical and reconstructive surgical applications, as well as dermal regeneration, including the healing of chronic and acute wounds, tendon and nerve repair. Our regenerative technology platform includes our legacy Integra ® Dermal Regeneration Template ("IDRT") products and complementary technologies that we have acquired.
These unique product designs are used for neurosurgical and reconstructive surgical applications, as well as dermal regeneration, including the healing of 8 chronic and acute wounds, tendon and nerve repair. Our regenerative technology platform includes our legacy Integra® Dermal Regeneration Template (“IDRT”) products and complementary technologies that we have acquired.
("Arkis") we added a platform technology, CerebroFlo® external ventricular drainage ("EVD"), catheter with Endexo® technology, a permanent additive designed to reduce the potential for catheter obstruction due to thrombus formation. The CerebroFlo EVD catheter has demonstrated an average of 99% less thrombus accumulation onto its surface, in vitro, compared to a market leading EVD catheter.
(“Arkis”) we added a platform technology, CerebroFlo® external ventricular drainage (“EVD”), a catheter with Endexo® technology, a permanent additive designed to reduce the potential for catheter obstruction due to thrombus formation. The CerebroFlo EVD catheter has demonstrated an average of 99% less thrombus accumulation onto its surface, in vitro, compared to a market leading EVD catheter.
AccuDrain ® , AmnioExcel ® , Aquasonic ® , Auragen ® , Aurora ® Surgiscope ® , Bactiseal ® , BioDFence ® , BioDOptix ® , Brainet ® , Budde ® , Buzz™, CereLink ® , CerebroFlo ® EVD Catheter with Endexo ® Technology, Codman ® , Codman Accu-Flo ® , Codman Bicol ® , Codman ® Certas ® Plus, Codman ® Hakim ® Programmable valve, Codman Holter ® , Codman ICP Express ® , Codman Microsensor ® , Codman VersaTru ® , Codman VPV ® , Contour-Flex ® , Cranioplastic ®, CRW ®, CRW Precision™, Ctherm™, CUSA ® , Cytal ® , DirectLink ® , DuraGen ® , DuraSeal ® , DuraSorb ®, Gentrix ® , HeliCote ® , HeliPlug ® , HeliTape ®, HeliMend ® , Helistat ® , Helitene ® , Hermetic™, Hy-Tape ® , Integra ® , IntegraLink ®, Isocool ® , Jarit ® , Lead-Lok™, Licox ® , LimiTorr™, 10 Luxtec ®, Mayfield ® , MatriStem UBM™, MediHone y® , MicroFrance ® , MicroMatrix ®, Miltex ® , Mischler™, MoniTorr ICP™, Natus ® , NeuraGen ® , NeuraWrap™, Nicolet ® , Omnigraft ® , Omni-Tract ® , OSV II ® , Padgett ® , PriMatrix ® , Pureflow™, Q-Snor™, Redmond™, Revize™, Ruggles ® , Signacreme ® , SurgiMend ® , TCC-EZ ® , TenoGlide ® , TissueMend ® , Ultra VS™, VersaTru ® , Xtrasorb ®, zRIP™, and the Integra logo are some of the material trademarks of Integra LifeSciences Corporation and its subsidiaries.
Acclarent Aera®, AccuDrain ® , AmnioExcel ® , Aquasonic ® , Auragen ® , Aurora ® Surgiscope ® , Bactiseal ® , BioDFence ® , BioDOptix ® , Brainet ® , Budde ® , Buzz™, CereLink ® , CerebroFlo ® EVD Catheter with Endexo ® Technology, Codman ® , Codman Accu-Flo ® , Codman Bicol ® , Codman ® Certas ® Plus, Codman ® Hakim ® Programmable valve, Codman Holter ® , Codman ICP Express ® , Codman Microsensor ® , Codman VersaTru ® , Codman VPV ® , Contour-Flex ® , Cranioplastic ®, CRW ®, CRW Precision™, Ctherm™, CUSA ® , Cytal ® , DirectLink ® , DuraGen ® , DuraSeal ® , DuraSorb ®, Gentrix ® , HeliCote ® , HeliPlug ® , HeliTape ®, HeliMend ® , Helistat ® , Helitene ® , Hermetic™, Hy-Tape ® , Integra ® , IntegraLink ®, Isocool ® , Jarit ® , Lead-Lok™, Licox ® , LimiTorr™, Luxtec ®, Mayfield ® , MatriStem UBM™, MediHoney ® , MicroFrance ® , MicroMatrix ®, Miltex ® , Mischler™, MoniTorr ICP™, Natus ® , NeuraGen ® , NeuraWrap™, Nicolet ® , Omnigraft ® , Omni-Tract ® , OSV II ® , Padgett ® , PriMatrix ® , Pureflow™, Q-Snor™, Redmond™, Relieva Spinplus®, Revize™, Ruggles ® , Signacreme ® , SurgiMend ® , TCC-EZ ® , TenoGlide ® , TissueMend ® , TruDi ® , Ultra VS™, VersaTru ® , Xtrasorb ®, zRIP™, and the Integra logo are some of the material trademarks of Integra LifeSciences Corporation and its subsidiaries.
Certain of our products, including but not limited to our dermal regeneration products, duraplasty products, wound care products, and nerve and tendon repair products, contain material derived from bovine tissue. We take great care to provide products that are safe and free of agents that can cause disease.
Certain of our products, including but not limited to our dermal regeneration products, duraplasty products, wound care products, and nerve and tendon repair products, contain natural collagen material derived from bovine tissue. We take great care to provide medical products that are safe and free of agents that can cause disease.
The manufacturer may also be subject to significant regulatory fines or penalties. 12 We also are required to register with the FDA as a medical device manufacturer and any devices we manufacture and distribute pursuant to clearance or approval by the FDA are subject to pervasive and continuing regulation by the FDA and certain state agencies.
The manufacturer may also be subject to significant regulatory fines or penalties. We also are required to register with the FDA as a medical device manufacturer and any devices we manufacture and distribute pursuant to clearance or approval by the FDA are subject to comprehensive and continuing regulation by the FDA and certain state agencies.
Our Environmental Health and Safety ("EH&S") organizational structure incorporates both 16 workplace EH&S coordinators and compliance teams. We have developed an Incident Procedure Policy and General Safety Rules that guide our colleagues to improve our workplace environment, improve safety, and reduce risk and costs.
Our Environmental Health and Safety (“EH&S”) organizational structure incorporates both workplace EH&S coordinators and compliance teams. We have developed an Incident Procedure Policy and General Safety Rules that guide our colleagues to improve our workplace environment, improve safety, and reduce risk and costs.
Although we take great care to provide that our products are safe and free of agents that can cause disease, products that contain materials derived from animals, including our products, may become subject to additional regulation, or even be banned in certain countries, because of concern over the potential for prion transmission.
Although we take great care to ensure that our products are safe and free of agents that can cause disease, products that contain materials derived from animals, including our products, may become subject to additional regulation, or even be banned in certain countries, because of concern over the potential for prior transmission.
In addition, DuraGen Secure, received approval in Japan, while DuraGen Plus, an absorbable and sutureless collagen onlay indicated as a dura substitute for the repair of dura mater, was approved in China. Broadening Impact on Care Pathways .
In addition, DuraGen® Secure, received approval in Japan, while DuraGen Plus, an absorbable and sutureless collagen onlay indicated as a dura substitute for the repair of dura mater, and Certas Plus were approved in China. Broadening Impact on Care Pathways .
This broad regenerative platform, which includes multiple leading brands such as Integra ® Dermal Matrices, AmnioExcel ® , SurgiMend ® , MicroMatrix ® and NeuraGen ® , primarily addresses the needs of plastic, reconstructive and general surgeons focused on the treatment of acute wounds, such as burns, chronic wounds, including diabetic foot ulcers, and surgical tissue repair, such as hernia, tendon, peripheral nerve repair and protection.
This broad regenerative platform, which includes multiple leading brands such as Integra® Dermal Regeneration Template, PriMatrix ® , AmnioExcel ® , SurgiMend ® , MicroMatrix ® , DuraSorb ® and NeuraGen ® , primarily addresses the needs of plastic, reconstructive and general surgeons focused on the treatment of acute wounds, such as burns, chronic wounds, including diabetic foot ulcers, and surgical tissue repair, such as hernia, tendon, peripheral nerve repair and protection.
Over the years, we have been significantly expanding our global footprint through investments in our commercial organization, the expansion and development of international markets and new product introductions. As part of our In-China-For-China strategy, we continue the build out of our assembly capabilities in our new facility in Suzhou, China.
Over the years, we have been significantly expanding our global footprint through investments in our commercial and manufacturing organizations, the expansion and development of international markets and new product introductions. As part of our In-China-For-China strategy, we continue to build out our assembly capabilities in our new facility in Suzhou, China.
Employee Engagement and Wellbeing We regularly seek employee feedback and sentiment about our workplace through global engagement surveys conducted on at least a bi-annual basis. After each survey is complete, we share detailed results with senior management and all employees within each department.
Employee Engagement and Wellbeing We regularly seek employee feedback and sentiment about our workplace through global engagement pulse surveys conducted on at least an annual basis. After each survey is complete, we share detailed results with senior management and all employees within each department.
Our work to combine our Bactiseal® antimicrobial technology with the Endexo anti-occlusive technology continues to progress for both a silicone-based hydrocephalus and EVD project. Throughout 2023, we continued to advance our innovation from the Rebound Therapeutics Corporation ("Rebound Therapeutics"), which was acquired in 2019.
Our work to combine our Bactiseal® antimicrobial technology with the Endexo anti-occlusive technology continues to progress for both a silicone-based hydrocephalus and EVD project. We also continued to advance our innovation from the Rebound Therapeutics Corporation (“Rebound Therapeutics”), which was acquired in 2019.
Our product development efforts are focused on core clinical applications in cerebrospinal fluid ("CSF") management, neuro-critical care monitoring, minimally invasive instruments and electrosurgery and ultrasonic medical technologies, as well as our ambition to transform the standard of care in neurosurgery with product advancements in minimally invasive surgery ("MIS") and the surgical management of intracerebral hemorrhage ("ICH").
Our product development efforts are focused on core clinical applications in cerebrospinal fluid (“CSF”) management, neuro-critical care monitoring, minimally invasive instruments and electrosurgery and ultrasonic medical technologies, as well as our ambition to transform the standard of care in neurosurgery with product advancements in minimally invasive surgery (“MIS”) and the surgical management of intracerebral hemorrhage (“ICH”).
We have been making investments to build more responsive and scalable processes, enhance the reliability of our supply chain, and drive productivity initiatives to further supply and lower costs. Additionally, we continue to invest in technologies, systems and processes to enhance the customer experience. In 2023, we continued to invest in our capacity expansion.
We have been making investments to build more responsive and scalable processes, enhance the reliability of our quality systems and supply chain, and drive productivity initiatives to further supply and lower costs. We continue to invest in technologies, systems and processes to enhance the customer experience. We also continue to invest in our capacity expansion.
In the European Economic Area ("EEA"), which is comprised of the 27 member states of the European Union (the "EU") plus Norway, Iceland and Liechtenstein, medical devices need to comply with specific requirements.
In the European Economic Area (“EEA”), which is comprised of the 27 member states of the European Union (the “EU”) plus Norway, Iceland and Liechtenstein, medical devices need to comply with specific requirements.
Risk Factors - We are subject to stringent domestic and foreig n medical device regulations and oversight and any adverse action may adversely affect our ability to compete in the marketplace and our financial condition and business operations” of this Annual Report on Form 10-K.
Risk Factors - We are subject to stringent domestic and foreign medical device regulations and oversight and any adverse action may adversely affect our ability to compete in the marketplace and our financial condition and business operations ” of this Annual Report on Form 10-K.
Vision We aspire to continue to be a worldwide leader in neurosurgery and reconstructive surgery with a portfolio of leading businesses that delivers outstanding customer experiences through innovation, execution and teamwork to positively impact the lives of millions of patients and their families. Strategy Following the completion of our strategic refresh in 2023, we refocused our strategies around five pillars.
Vision We aspire to continue to be a worldwide leader in neurosurgery and reconstructive surgery with a portfolio of leading businesses that delivers outstanding customer experiences through innovation, execution and teamwork to positively impact the lives of millions of patients and their families. Strategy Our strategies are focused around five pillars.
The GDPR also requires companies processing personal data of individuals residing in the EU to comply with EU privacy and data protection rules. Please refer to “Item 1A.
The GDPR also requires companies processing personal data of individuals residing in the EU to comply with EU privacy and data protection rules.
Furthermore, we believe that, owing to the ENT segment being an anatomical adjacency to neurosurgery, the acquisition will allow Integra to deliver future innovation both within the ENT segment and across our other CSS technology platforms.
Furthermore, we believe that, owing to the ENT business being an anatomical adjacency to neurosurgery, the acquisition will allow Integra to deliver future innovation both within the ENT business and across our other CSS technology platforms. Driving Operations and Customer Excellence.
We believe our company is stronger when we build diverse teams and leverage broad perspectives. Diverse teams meet the needs of our shareholders, customers, colleagues and communities we serve. Our commitment to diversity and inclusion starts at the top with our Board of Directors and Chief Executive Officer.
We believe our company is stronger when we leverage broad perspectives to meet the needs of our shareholders, customers, colleagues and the communities we serve. Our commitment to workforce development starts at the top with our Board of Directors and Chief Executive Officer.
Implementation of legislative or regulatory reforms to reimbursement systems, including price regulation, competitive bidding and tendering, coverage and payment policies, comparative effectiveness of therapies, technology assessments and managed-care arrangements, or adverse decisions relating to our products by administrators of these systems in coverage or reimbursement, could significantly reduce reimbursement or result in the denial of coverage, which could have an impact on the acceptance of and demand for our products and the prices that our customers are willing to pay for them.
Implementation of legislative or regulatory reforms to reimbursement systems, including price regulation, competitive bidding and tendering, coverage and payment policies, comparative effectiveness of therapies, technology assessments and managed-care arrangements, or adverse decisions relating to our products by administrators of these systems in coverage or reimbursement, could significantly reduce reimbursement or result in the denial of coverage, which could have an impact on the acceptance of and demand for our products and the prices that our customers are willing to pay for them. 14 Healthcare Reform A primary trend in the U.S. healthcare industry and elsewhere is cost containment.
The regulatory process for obtaining product approvals and clearances can be onerous and costly. Under the Federal Food, Drug and Cosmetic Act (the "FD&C Act"), authorization to commercially distribute a new medical device in the U.S. is generally obtained in one of two primary ways.
The regulatory process for obtaining product approvals and clearances can be onerous and costly. Under the Federal Food, Drug and Cosmetic Act (the “FD&C Act”), authorization to commercially distribute a new medical device in the U.S. is generally obtained in one of two primary ways, both of which require review by the FDA.
Founded in 1989 with the acquisition of an engineered collagen technology platform used to repair and regenerate tissue, our common stock trades on the Nasdaq Global Select Market (“Nasdaq”) under the symbol “IART.” We have developed numerous product lines from this technology for applications ranging from burn and deep tissue wounds to the repair of dura mater in the brain, as well as nerves and tendons.
Our common stock trades on the Nasdaq Global Select Market (“Nasdaq”) under the symbol “IART.” We have developed numerous product lines from this technology for applications ranging from burn and deep tissue wounds to the repair of dura mater in the brain, as well as nerves and tendons.
Although we continue to transition our certification profile to meet the new EU MDR requirements, these stricter regulations set forth in the EU MDR may pose additional challenges for Integra to continue marketing products in the EU as these regulations come into force. See “Item 1A.
Although we continue to transition our certification profile to meet the new EU MDR requirements, these stricter regulations set forth in the EU MDR may pose additional challenges for Integra to continue marketing products in the EU. See “ Item 1A.
ITEM 1. BUSINESS OVERVIEW Integra LifeSciences Holdings Corporation is a leading global medical technology company innovating treatment pathways to advance patient outcomes and set new standards of surgical, neurologic and regenerative care.
ITEM 1. BUSINESS OVERVIEW Integra LifeSciences Holdings Corporation was founded in 1989 and is a leading global medical technology company innovating treatment pathways to advance patient outcomes and set new standards of surgical, neurologic, ear, nose, and throat (“ENT”) and regenerative care.
In accordance with the Exchange Act, we file annual reports on Form 10K, quarterly reports on Form 10Q, current reports on Form 8-K, and any amendments to those reports, proxy statements and other information with the Securities and Exchange Commission, ("the SEC").
In accordance with the Exchange Act, we file annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and any amendments to those reports, proxy statements and other information with the Securities and Exchange Commission, (“the SEC”).
We offer leading technologies in dural repair, ultrasonic tissue ablation, intracranial pressure ("ICP") monitoring, hydrocephalus management, and cranial stabilization systems, while providing a rich research and development pipeline for growth. Rounding out the portfolio is a catalog of surgical headlamps, surgical instrumentation, as well as after-market service.
We offer leading technologies in dural repair, ultrasonic tissue ablation, ICP monitoring, hydrocephalus management, and cranial stabilization systems, while providing a rich research and development pipeline for growth. Our specialty instrumentation portfolio includes a catalog of surgical headlamps, surgical instruments, as well as after-market service.
Certain countries, as well as the EU, have issued regulations that govern products that contain materials derived from animal sources. Regulatory authorities are particularly concerned with materials infected with the agent that causes BSE.
Certain countries, including those in the EEA, have issued regulations that govern products that contain materials derived from animal sources. Regulatory authorities are particularly concerned with materials infected with the agent that causes BSE.
Our research and development efforts are focused on the further development and improvement of our existing products, the design and development of new innovative medical technologies and regulatory compliance across all our business segments.
Investment in research and development is critical to driving our future growth. Our research and development efforts are focused on the further development and improvement of our existing products, the design and development of new innovative medical technologies and regulatory compliance across all our business segments.
Those manufacturing operations are also subject to additional challenges and risks associated with international operations described under the caption “Risk Factors” set forth in Part I, Item 1A of this Annual Report on Form 10-K.
Some of our manufacturing operations are located outside of the U.S., including in Puerto Rico, Switzerland, Ireland and France. Those manufacturing operations are also subject to additional challenges and risks associated with international operations described under the caption “Risk Factors” set forth in Part I, Item 1A of this Annual Report on Form 10-K.
Rebound Therapeutics specializes in a single-use medical device, known as the Aurora Surgiscope, which is the only tubular retractor system designed for cranial surgery with an integrated access channel, camera and lighting.
Rebound Therapeutics specializes in a single-use medical device, known as the Aurora Surgiscope, which is the only tubular retractor system designed for cranial surgery with an integrated access channel, camera and lighting. The 9mm Surgiscope received 510(k) clearance from the FDA in the fourth quarter of 2023.
Codman Specialty Surgical Our CSS segment offers global, neurosurgery market-leading technologies, brands and instrumentation. The product portfolio represents a continuum of care from pre-operative, to the neurosurgery operating room, to the neuro-critical care unit and post care for both adult and pediatric patients suffering from brain tumors, brain injury, cerebrospinal fluid pressure complications and other neurological conditions.
The product portfolio represents a continuum of care from pre-operative, to the neurosurgery operating room, to the neuro-critical care unit and post care for both adult and pediatric patients suffering from brain tumors, brain injury, cerebrospinal fluid pressure complications and other neurological conditions.
U.S. federal and state laws protect the confidentiality of certain patient health information, including patient medical records, and restrict the use and disclosure of patient health information by health care providers.
U.S. federal and state laws protect the confidentiality of certain patient health information, including patient medical records, and restrict the use and disclosure of patient health information by health care providers and other persons or entities that create, receive, maintain, or transmit health information.
We understand that we rely on our employees worldwide to propel our organization forward with great ideas, innovations and leadership. Workforce Demographics 15 As of December 31, 2023, we had approximately 3,946 regular full and part time employees and 1383 contingent, subcontracted, and outsourced partners.
We understand that we rely on our employees worldwide to propel our organization forward with great ideas, innovations and leadership. Workforce Demographics As of December 31, 2024, we had approximately 4,396 regular full and part time employees.
COMPETITION The healthcare industry is highly competitive and characterized by continual change and improvements in technology. This is particularly the case in the market segments in which we operate. A number of companies have developed or are expected to develop products that compete or will compete with our products.
This is particularly the case in the market segments in which we operate. A number of companies have developed or are expected to develop products that compete or will compete with our products.
Due to the high standards and FDA requirements applicable to manufacturing our products, such as the FDA's Quality System Regulation and Good Manufacturing Practices, we may not be able to quickly establish additional or replacement sources for certain components or materials. Some of our manufacturing operations are located outside of the U.S., including in Puerto Rico, Switzerland, Ireland and France.
Due to the high standards and FDA requirements applicable to manufacturing our products, such as the FDA ’ s Quality System Regulation and Good Manufacturing Practices, we may not be able to quickly establish additional or replacement sources for certain components or materials.
We are well-established in acute care in the hospital setting and continue to leverage that strong position to grow in this segment and shape treatment pathways into preoperative care and additional sites of care. Driving Operations and Customer Excellence.
We are well-established in acute care in the hospital setting and continue to leverage that strong position to grow in this segment and shape treatment pathways into preoperative care and additional sites of care. On April 1, 2024, we successfully completed the acquisition of Acclarent, Inc. (“Acclarent”).
Other regulations Anti-Bribery Laws . In the U.S., we are subject to laws and regulations pertaining to healthcare fraud and abuse, including anti-kickback laws and physician self-referral laws that regulate the means by which companies in the health care industry may market their products to hospitals and health care professionals and may compete by discounting the prices of their products.
In the U.S., we are subject to laws and regulations pertaining to healthcare fraud and abuse, including anti-kickback laws, false claims, and other health care fraud laws that regulate, among other things, the means by which companies in the health care industry may sell and market their products to hospitals and health care professionals and regulate the arrangements and engagements with customers.
Postmarket requirements are also followed globally where our products are registered and approved. These foreign jurisdictions have similar requirements to the FDA which include reporting requirements such as adverse events and recalls.
Postmarket requirements are also followed globally where our products are registered and approved. These foreign jurisdictions have similar requirements to the FDA which include reporting requirements such as adverse events and recalls. International Medical device regulations also are in effect in many of the countries in which we do business outside the U.S.
Approximately 70% of our employees are located in the United States, 21% in Europe, 2% in Latin America and Canada and 7% in Asia Pacific which includes Australia and New Zealand. Diversity and Inclusion A diverse workforce and an inclusive culture and work environment is a business priority and a key to our long-term success.
Approximately 70% of our employees are located in the United States, 20% in Europe, 9% in Asia Pacific which includes Australia and New Zealand and 1% in Latin America and Canada. Building a Strong Workforce A talented and engaged workforce is a business priority and a key to our long-term success.
The second, more rigorous process, known as pre-market approval (“PMA”) requires us to independently demonstrate that a medical device is safe and effective for its intended use. This process is generally much more time-consuming and expensive than the 510(k) process.
The PMA process is the second, more rigorous process, which requires us to independently demonstrate that a medical device is safe and effective for its intended use. This process is generally much more time-consuming and expensive than the 510(k) process. The PMA process involves a complex and lengthy testing process and may require several years to obtain.
MANUFACTURE AND AVAILABILITY OF RAW MATERIALS We manufacture products at manufacturing facilities located in various countries throughout the world. We purchase many of the components and raw materials used in manufacturing our products from numerous suppliers in various countries. In general, raw materials essential to our businesses are readily available from multiple sources.
We purchase many of the components and raw materials used in manufacturing our products from numerous suppliers in various countries. In general, raw materials essential to our businesses are readily available from multiple sources. For reasons of quality assurance, availability, or cost effectiveness, certain components and raw materials are available only from one or a limited number of suppliers.
We provide market-competitive compensation and benefits based on benchmarking surveys we conduct regularly for all position levels against relevant peer companies. Our annual and long-term incentive packages are linked directly to business and individual performance, with a balance of short- and long-term financial and strategic objectives. We have an employee stock purchase plan.
Our annual and long-term incentive packages are linked directly to business and individual performance, with a balance of short- and long-term financial and strategic objectives. We have an employee stock purchase plan.
Outside the U.S., we have a combination of direct and indirect sales channels in international markets to sell certain product lines. This business segment also includes private-label sales of a broad set of our regenerative and wound care technologies. Our customers are other medical technology companies that sell to end markets primarily in spine, surgical and wound care.
This business segment also includes private-label sales of a broad set of our regenerative and wound care technologies. Our customers are other medical technology companies that sell to end markets primarily in spine, surgical and wound care. COMPETITION The healthcare industry is highly competitive and characterized by continual change and improvements in technology.
GOVERNMENT REGULATION AND COMPLIANCE We are a manufacturer and marketer of medical devices and Human Tissue and Cell Based Products ("HCT/Ps") and therefore are subject to extensive regulation by the FDA, the Center for Medicare Services of the U.S. Department of Health and Human Services ("HHS"), other federal governmental agencies and, in some jurisdictions, by state and foreign governmental authorities.
GOVERNMENT REGULATION AND COMPLIANCE We are a manufacturer and marketer of medical devices and Human Tissue and Cell Based Products (“HCT/Ps”) and therefore are subject to extensive regulation by the FDA, the Centers for Medicare & Medicaid Services (“CMS”) of the U.S.
United States Food and Drug Administration Our products are subject to extensive regulation particularly as to safety, efficacy and adherence to FDA Quality System Regulation, and related manufacturing standards. Medical device products are subject to rigorous FDA and other governmental agency regulations in the United States and similar regulations of foreign agencies abroad.
Medical device products are subject to rigorous FDA and other governmental agency regulations in the United States and similar regulations of foreign agencies abroad.
In Europe, for example, we are subject to EU General Data Protection Regulation ("GDPR") which requires member states to impose minimum restrictions on the collection, use and transfer of personal data and includes, among other things, a requirement for prompt notice of data breaches to data subjects and supervisory authorities in certain circumstances and significant fines for non-compliance.
In Europe, for example, we are subject to the EU General Data Protection Regulation, including as implemented in the UK (collectively, “GDPR”) which imposes restrictions on the collection, use and transfer of personal data and includes, among other things, a requirement for prompt notice of data breaches to data subjects and supervisory authorities in certain circumstances and significant fines for non-compliance, which can go up to €20 million or up to 4% of the total worldwide annual turnover of the preceding financial year, whichever is higher.
Reimbursement from Medicare, Medicaid and other third-party payors may be subject to periodic adjustments as a result of legislative, regulatory and policy changes, as well as budgetary pressures.
Government payors, such as Medicare, are increasingly seeking additional clinical evidence beyond the data required to obtain marketing clearance, before covering our products for their patients. Reimbursement from Medicare, Medicaid and other third-party payors may be subject to periodic adjustments as a result of legislative, regulatory and policy changes, as well as budgetary pressures.
The majority of Integra manufacturing facilities participate in the Medical Device Single Audit Program and are audited annually for compliance with the Quality System for US FDA, Canada, Australia, Brazil, and Japan. Medical device regulations also are in effect in many of the countries in which we do business outside the U.S.
The majority of Integra manufacturing facilities participate in the Medical Device Single Audit Program and are audited annually for compliance with the Quality System for US FDA, Canada, Australia, Brazil, and Japan. Postmarket Requirements . After a device is cleared or approved for commercial distribution, numerous regulatory requirements apply.
The FDA also issued guidance on post market management of cyber security in medical devices. Outside the U.S., we are impacted by the privacy and data security requirements at the international, national and regional level, and on an industry specific basis.
Compliance with such laws will likely be an increasing and substantial cost in the future. Outside the U.S., we are impacted by the privacy and data security requirements at the international, national and regional level, and on an industry specific basis.
In seeking to sustain a culture of excellence and accountability, we have focused on employee empowerment and agility and building a diverse and inclusive workplace. These efforts resulted in our being named in several best workplace lists globally in 2023.
In seeking to sustain a culture of excellence and accountability, we focus on employee empowerment, professional development and building an environment where all employees can contribute to their fullest potential. These efforts have been recognized through our inclusion in several best workplace lists globally in 2023 and 2024.