Biggest changeAn HCT/P is regulated solely under section 361 of the Public Health Service Act (“PHSA”) and 21 CFR Part 1271 if it meets the following four criteria: 1) The HCT/P is minimally manipulated; 2) The HCT/P is intended for homologous use only; 3) The manufacture of the HCT/P does not involve the combination of the cells or tissues with another article (with limited exceptions); and 4) The HCT/P does not have a systemic effect and is not dependent upon the metabolic activity of living cells for its primary function; or the HCT/P has a systemic effect or is dependent upon the metabolic activity of living cells for its primary function and: is for autologous use; is for allogeneic use in a first-degree or second-degree blood relative; or is for reproductive use.
Biggest changeThe core CGTP requirements include requirements for: ● Facilities ● Environmental control ● Equipment ● Supplies and reagents ● Recovery ● Processing and process controls ● Labeling controls ● Storage ● Receipt, predistribution shipment, and distribution of an HCT/P ● Donor eligibility determinations, donor screening, and donor testing An HCT/P is regulated solely under section 361 of the Public Health Service Act (“PHSA”) and 21 CFR Part 1271 if it meets the following four criteria: 1) The HCT/P is minimally manipulated; 2) The HCT/P is intended for homologous use only; as reflected by the labeling, advertising, or other indications of the manufacturer’s objective intent; 3) The manufacture of the HCT/P does not involve the combination of the cells or tissues with another article (with limited exceptions); and 4) Either i) The HCT/P does not have a systemic effect and is not dependent upon the metabolic activity of living cells for its primary function; or ii) The HCT/P has a systemic effect or is dependent upon the metabolic activity of living cells for its primary function and: is for autologous use; is for allogeneic use in a first-degree or second-degree blood relative; or is for reproductive use.
Our 3Demin products are easily hydrated with any biocompatible liquid, making them an option for various bone grafting applications. They are most commonly used in spinal fusion procedures. 3 ● OsteoFactor is a processed allograft that contains retained growth factors found within the endosteum layer of allograft bone.
Our 3Demin products are easily hydrated with any biocompatible liquid, making them an option for various bone grafting applications. They are most commonly used in spinal fusion procedures. ● OsteoFactor is a processed allograft that contains retained growth factors found within the endosteum layer of allograft bone.
It is intended for spinal fusion procedures at one level (C3 − T1 inclusive) in skeletally mature patients for the treatment of degenerative disc disease. ● The Irix-A Lumbar Integrated Fusion System consists of an integrated titanium ring, surrounded by an outer PEEK ring and three screws.
It is intended for spinal fusion procedures at one level (C3 − T1 inclusive) in skeletally mature patients for the treatment of degenerative disc disease. 5 ● The Irix-A Lumbar Integrated Fusion System consists of an integrated titanium ring, surrounded by an outer PEEK ring and three screws.
Certain states also mandate implementation of commercial compliance programs, impose restrictions on device manufacturer marketing practices and require tracking and reporting of gifts, compensation and other remuneration to healthcare professionals and entities. Our operations are also subject to the U.S. Foreign Corrupt Practices Act (“FCPA”).
Certain states also mandate implementation of commercial compliance programs, impose restrictions on device manufacturer marketing practices and require tracking and reporting of gifts, compensation and other remuneration to healthcare professionals and entities. 12 Our operations are also subject to the U.S. Foreign Corrupt Practices Act (“FCPA”).
The manufacturer must be truthful and not misleading in the reimbursement advice it gives to customers. 12 Actions under the Federal False Claims Act may be brought by the Attorney General or as a qui tam action by a private individual in the name of the government.
The manufacturer must be truthful and not misleading in the reimbursement advice it gives to customers. Actions under the Federal False Claims Act may be brought by the Attorney General or as a qui tam action by a private individual in the name of the government.
Our products are used by orthopedic spine surgeons and neurosurgeons to treat a variety of spinal disorders in the cervical, thoracolumbar, and interbody spine. We promote and sell our products in the United States through independent distributors and stocking agents, supported by direct employees.
Our products are used by orthopedic spine surgeons and neurosurgeons to treat a variety of spinal disorders in the cervical, thoracolumbar, and interbody spine. We promote our products in the United States through independent distributors and stocking agents, supported by direct employees.
We expect to be able to continue to build our network for donor tissue as our processing capabilities and sales increase. Competition There are various public and private organizations that offer both fixation and orthobiologics to their customers.
We expect to be able to continue to build our network for donor tissue as our processing capabilities and sales increase. 6 Competition There are various public and private organizations that offer both fixation and orthobiologics to their customers.
Under the X-spine name, we own the following registered trademarks: SILEX®, X-SPINE®, IRIX®, CAPLESS®, CERTEX®, CALIX®, H-GRAFT®, SPIDER, X90®, HYDRAGRAFT®, BUTREX®, FORTEX®, AXLE®, FIXCET®, XTANT®, Capless® and X-spine’s square design logo.
Under the X-spine name, we own the following registered trademarks: SILEX®, IRIX®, CERTEX®, CALIX®, H-GRAFT®, SPIDER, X90®, BUTREX®, FORTEX®, AXLE®, FIXCET®, XTANT®, and X-spine’s square design logo.
In February 2024, the FDA issued a final rule replacing the QSR with the Quality Management System Regulation, or QMSR, which incorporates by reference the quality management system requirements of ISO 13485:2016, as discussed below. The FDA has stated that the standards contained in ISO 13485:2016 are substantially similar to those set forth in the existing QSR.
In February 2024, the FDA issued a final rule replacing the QSR with the Quality Management System Regulation, or QMSR, which incorporates by reference the quality management system requirements of ISO 13485:2016. The FDA has stated that the standards contained in ISO 13485:2016 are substantially similar to those set forth in the existing QSR.
On October 15, 2015, our common stock began trading on the NYSE MKT, now known as the NYSE American, under the ticker symbol “XTNT.” Controlled Company Status As a result of debt restructuring transactions completed in 2018 and 2020, OrbiMed Royalty Opportunities II, LP (“Royalty Opportunities”) and ROS Acquisition Offshore LP (“ROS”), which are funds affiliated with OrbiMed Advisors LLC (“OrbiMed”), collectively own approximately 56.2% of our outstanding common stock as of December 31, 2023.
On October 15, 2015, our common stock began trading on the NYSE MKT, now known as the NYSE American, under the ticker symbol “XTNT.” Controlled Company Status As a result of debt restructuring transactions completed in 2018 and 2020, OrbiMed Royalty Opportunities II, LP (“Royalty Opportunities”) and ROS Acquisition Offshore LP (“ROS”), which are funds affiliated with OrbiMed Advisors LLC (“OrbiMed”), collectively own approximately 53% of our outstanding common stock as of December 31, 2024.
As a condition of employment, we generally require employees to execute an agreement relating to the confidential nature of and company ownership of proprietary information and assigning intellectual property rights to us. We generally require confidentiality agreements with vendors, consultants, and others who may have access to proprietary information.
We protect our proprietary rights through a variety of methods. As a condition of employment, we generally require employees to execute an agreement relating to the confidential nature of and company ownership of proprietary information and assigning intellectual property rights to us. We generally require confidentiality agreements with vendors, consultants, and others who may have access to proprietary information.
We have an extensive distribution channel of commissioned independent agents and stocking agents in the United States representing some or all of our products. We also maintain a national accounts program to enable our agents to gain access to independent health delivery network hospitals and through group purchasing organizations (“GPOs”).
We have an extensive sales channel of independent commissioned agents and stocking distributors in the United States representing some or all of our products. We also maintain a national accounts program to enable our agents to gain access to integrated delivery network (“IDNs”) hospitals and through group purchasing organizations (“GPOs”).
These regulated activities include product design and development, testing, manufacturing, labeling, storage, safety, premarket clearance, advertising and promotion, product marketing, sales and distribution, post-market surveillance and post-market adverse event reporting. All products currently marketed by Xtant are regulated as HCT/Ps and/or have received 510(k) clearances.
These regulated activities include but are not limited to, product design and development, testing, manufacturing, labeling, storage, safety, premarket clearance, advertising and promotion, product marketing, sales and distribution, post-market surveillance and post-market adverse event reporting. All products currently marketed by Xtant are regulated as HCT/Ps and/or have received 510(k) clearances from the FDA.
Class III devices are generally the highest risk devices and are subject to the highest level of regulatory control to provide reasonable assurance of safety and effectiveness. Class III devices must typically be approved by the FDA before they are marketed.
Class I devices are deemed to be low risk and are subject to the fewest regulatory controls. Class III devices are generally the highest risk devices and are subject to the highest level of regulatory control to provide reasonable assurance of safety and effectiveness. Class III devices must typically be approved by the FDA before they are marketed.
Unlike many of the various growth factor-based products on the market today, OsteoFactor is not limited to a single growth factor but contains a wide array of naturally occurring proteins and peptides that support bone formation and remodeling. ● OsteoVive Plus is a growth factor enriched cellular bone matrix created through a proprietary processing method.
Unlike many of the various growth factor-based products on the market today, OsteoFactor is not limited to a single growth factor but contains a wide array of naturally occurring proteins and peptides that support bone formation and remodeling. ● OsteoVive Plus is an aseptically processed, viable bone allograft created through a proprietary processing method.
The advantage of the de novo classification is that it generally requires less data than a PMA. The disadvantage is that it may require more data than a 510(k) and most often will include human clinical data. A request for de novo classification also has a longer review time.
The disadvantage is that it may require more data than a 510(k) and most often will include human clinical data. A request for de novo classification also has a longer review time.
The device sponsor must then fulfill more rigorous PMA requirements or can request a risk-based classification determination for the device in accordance with the de novo process, which is a route to market for novel medical devices that are low to moderate risk and are not substantially equivalent to a predicate device.
The device sponsor must then fulfill more rigorous PMA requirements or can request a risk-based classification determination for the device in accordance with the de novo process, which is a route to market for novel medical devices that are low to moderate risk and are not substantially equivalent to a predicate device. 10 The advantage of the de novo classification is that it generally requires less data than a PMA.
The FDA has broad post-market and regulatory enforcement powers. Medical device manufacturers are subject to unannounced inspections by the FDA and other state, local and foreign regulatory authorities to assess compliance with the QSR and other applicable regulations, and these inspections may include the manufacturing facilities of any suppliers.
Medical device manufacturers are subject to unannounced inspections by the FDA and other state, local and foreign regulatory authorities to assess compliance with the QMSR and other applicable regulations, and these inspections may include the manufacturing facilities of any suppliers.
Of our U.S. workforce, 3% are veterans. 14 Turnover Xtant continually monitors employee turnover rates as its success depends upon retaining highly trained personnel. The average tenure of our employees is 3.9 years. The average tenure of the members of our management team is 6 years.
Of our U.S. workforce, 2% are veterans. Turnover Xtant continually monitors employee turnover rates as its success depends upon retaining highly trained personnel. The average tenure of our employees is approximately 4 years. The average tenure of the members of our management team is approximately 7 years.
We currently maintain a Board of Directors with a majority of independent directors and a compensation committee and nominating and corporate governance committee composed entirely of independent directors. 16 Available Information We make available, free of charge and through our Internet website, our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and any amendments to any such reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission (“SEC”).
Available Information We make available, free of charge and through our Internet website, our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and any amendments to any such reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission (“SEC”).
These offerings complement our portfolio of orthobiologics and spinal implant fixation systems. This transaction was conducted through a process supervised by the United States Bankruptcy Court in connection with Surgalign Holdings’ bankruptcy proceedings.
These offerings complement our portfolio of orthobiologics and spinal implant fixation systems. This transaction was conducted through a process supervised by the United States Bankruptcy Court in connection with Surgalign Holdings’ bankruptcy proceedings. We funded the purchase price of $5 million with cash on hand.
Of these 215 employees, 33 are located outside the United States, primarily in Germany. In addition, we utilize various outsourced services to manage normal business cycles. As of December 31, 2023, of our total workforce, 49% are female and 21% are racially or ethnically diverse. Of our management team, 36% are female and 15% are racially or ethnically diverse.
Of these 232 employees, 40 are located outside the United States, primarily in Germany. In addition, we utilize various outsourced services to manage normal business cycles. As of December 31, 2024, of our total workforce, 49% are female and 39% are racially or ethnically diverse. Of our management team, 39% are female and 14% are racially or ethnically diverse.
The 510(k) clearance pathway is much less burdensome and time-consuming than the PMA approval pathway. The de novo pathway has an enhanced burden compared to the 510(k) clearance pathway, but is much less burdensome than a PMA approval process.
The PMA approval pathway requires proof of the safety and effectiveness of the device to the FDA’s satisfaction. The 510(k)-clearance pathway is much less burdensome and time-consuming than the PMA approval pathway. The de novo pathway has an enhanced burden compared to the 510(k)-clearance pathway but is much less burdensome than a PMA approval process.
We funded the purchase price of $5 million with cash on hand. 2 RTI Surgical, Inc.’s nanOss Production Operations On October 23, 2023, we acquired the nanOss production operations owned by RTI Surgical, Inc. (“RTI”) pursuant to an Asset Purchase Agreement dated October 23, 2023 between us and RTI (the “RTI Asset Purchase Agreement”).
RTI Surgical, Inc.’s nanOss Production Operations On October 23, 2023, we acquired the nanOss production operations owned by RTI Surgical, Inc. (“RTI”) pursuant to an Asset Purchase Agreement dated October 23, 2023 between us and RTI (the “RTI Asset Purchase Agreement”).
Recognizing that our Code of Conduct may not address every situation our employees may encounter, other resources exist to assist our employees in their decision-making, including our management team, training and a hotline pursuant to which employees can ask questions or report issues on an anonymous basis.
Recognizing that our Code of Conduct may not address every situation our employees may encounter, other resources exist to assist our employees in their decision-making, including our management team, training and a hotline pursuant to which employees can ask questions or report issues on an anonymous basis. 14 Employee Safety, Health and Wellness We are committed to maintaining a safe workplace and promoting the health and wellness of our employees.
Conversely, motion preservation devices are designed predominantly to stabilize the spine and allow for motion of the segments. Spine implants can be surgically applied via traditional open surgery or via minimally invasive surgery. We provide devices in both the fixation and motion preservation categories of the spine implant market and via both surgical methodologies.
Conversely, motion preservation devices are designed predominantly to stabilize the spine and allow for motion of the segments. Spine implants can be surgically applied via traditional open surgery or via minimally invasive surgery.
The Coflex and CoFix products have been approved by the U.S. Food and Drug Administration (the “FDA”) for the treatment of moderate to severe lumbar spinal stenosis in conjunction with decompression and provide minimally invasive, motion preserving stabilization.
Food and Drug Administration (the “FDA”) for the treatment of moderate to severe lumbar spinal stenosis in conjunction with decompression and provide minimally invasive, motion preserving stabilization.
We also have implemented multiple safety programs and regularly perform safety hazard evaluations within our manufacturing facility. We publish a quarterly Safety Standard newsletter that reiterates our commitment to safety, highlights actions we have taken and intend to take to improve employee safety, and provides practical advice to employees to keep them and their families safe.
We publish a quarterly Safety Standard newsletter that reiterates our commitment to safety, highlights actions we have taken and intend to take to improve employee safety, and provides practical advice to employees to keep them and their families safe.
We meet all licensing requirements for the distribution of HCT/Ps in states with licensing requirements, including Florida, California, Delaware, Illinois, Louisiana, Maryland, Oregon, and New York. Our industry is highly regulated, and we cannot predict the impact of future regulations on either us or our customers.
In addition, we comply with all licensing requirement for distributing HCT/Ps in states with such regulations, including Florida, California, Delaware, Illinois, Louisiana, Maryland, Oregon, and New York. As our industry is highly regulated, we cannot predict the impact of future regulations on our operations or those of our customers.
A novel device is placed in Class III by default, but it may be eligible to be placed in Class I or Class II via “de novo” classification if it can be shown to pose only low to moderate risk with appropriate regulatory controls. 9 The PMA approval pathway requires proof of the safety and effectiveness of the device to the FDA’s satisfaction.
A novel device is placed in Class III by default, but it may be eligible to be placed in Class I or Class II via “de novo” classification if it can be shown to pose only low to moderate risk with appropriate regulatory controls.
(“Surgalign SPV”), a then indirect wholly owned subsidiary of Surgalign Holdings, Inc. (“Surgalign Holdings”), which held certain intellectual property, contractual rights and other assets related to the design, manufacture, sale and distribution of the Coflex and CoFix products in the United States, for an aggregate purchase price of $17.0 million in cash.
(“Surgalign Holdings”), which held certain intellectual property, contractual rights and other assets related to the design, manufacture, sale and distribution of the Coflex and CoFix products in the United States, for an aggregate purchase price of $17.0 million in cash. The Coflex and CoFix products have been approved by the U.S.
We currently own the following registered trademarks: OsteoSponge®, OsteoVive®, OsteoWrap®, OsteoLock®, BacFast®, OsteoSelect®, Elutia®, OsteoSTX®, hMatrix®, 3Demin®, BACTERINSE®, Circle of Life®, Coflex®, CoFix TM , ASPECT®, BACJAC®, BACFUSE®, BIGFOOT®, CLARITY®, CONTACT®, CROSS-FUSE®, LAT-FUSE®, LOCKED AND LOADED®, NANOSS®, NUNEC®, PAC PLATE®, QUANTUM®, RELEASE®, SLIMFUSE®, STREAMLINE®, X-LINK®, ELEMAX®, UNISON®, FORTILINK®, TETRAFUSE®, CERVALIGN®, NANOSS 3D®, DCI®, DSS®, HPS®, OPTISTRAIN®, PARADIGM SPINE®, the Paradigm Spine design logo, THE MOVEMENT IN SPINE CARE®, DUALITY®, TIPLUS®, FIBREX®, MAXFUSE®, BIOMAX®, and CORTERA®.
We currently own the following registered trademarks: OsteoSponge®, OsteoVive®, OsteoWrap®, BacFast®, OsteoSelect®, 3Demin®, Circle of Life®, Coflex®, CoFix®, ARANAX®, ASPECT®, ATRIX-C®, ATRIX-C UNION®, BACJAC®, BACFUSE®, BIGFOOT®, CLARITY®, CONTACT®, CROSS-FUSE®, INTERLAMINAR STABILIZATION®, INTICE®, LAT-FUSE®, NANOSS®, NUNEC®, PAC PLATE®, QUANTUM®, RELEASE®, SLIMFUSE®, STREAMLINE®, X-LINK®, XPRESS®, XSPAN®, ZYFIX®, ELEMAX®, UNISON®, FORTILINK®, TETRAFUSE®, CERVALIGN®, NANOSS 3D®, DCI®, DSS®, HPS®, PARADIGM SPINE®, the Paradigm Spine design logo, THE MOVEMENT IN SPINE CARE®, TIPLUS®, FIBREX®, MAXFUSE®, BIOMAX®, CORTERA®, ELEVATE YOUR BONE GRAFT®, and ELEVATED PROCEDURAL SOLUTIONS®.
Headcount and Employee Demographics As of December 31, 2023, Xtant had 215 employees, 207 of whom were full time employees, and of whom 70 were in operations, 50 were in sales and marketing, 13 in research and development and engineering, 26 in regulatory and quality affairs, and 23 were in administrative functions.
Headcount and Employee Demographics As of December 31, 2024, Xtant had 232 employees, 217 of whom were full time employees, and of whom 90 were in operations, 42 were in sales and marketing, 3 in research and development and engineering, 31 in regulatory and quality affairs, and 26 were in administrative functions.
We encourage employees to obtain skills, knowledge and abilities which may improve their opportunities for career advancement within our Company and the purpose of our professional development policy is to provide our employees with the requirements for approval, time off, and reimbursement for employee training and professional development activities.
We encourage employees to obtain skills, knowledge and abilities which may improve their opportunities for career advancement within our Company and the purpose of our professional development policy is to provide our employees with the requirements for approval, time off, and reimbursement for employee training and professional development activities. 15 Diversity and Inclusion We strive to create a diverse and inclusive workplace in which all employees feel respected, valued and empowered to reach their full potential.
It is intended to promote fusion of the subaxial cervical spine and cervico-thoracic junction (C3 − T3 inclusive). ● The Spider Cervical Plating System consists of simple, single step locking with 3 forms of locking feedback providing confidence in Spider System construct and performance. ● The Streamline OCT System allows a rigid construct to be created in the occipito-cervico-thoracic spine by offering a broad range of implants.
Some of our key spinal implant product lines include: Cervical Products ● The Spider Cervical Plating System consists of simple, single step locking with 3 forms of locking feedback providing confidence in Spider System construct and performance. ● The Streamline OCT System allows a rigid construct to be created in the occipito-cervico-thoracic spine by offering a broad range of implants.
We review third-party proprietary rights, including patents and patent applications, as available, to develop an effective intellectual property strategy, avoid infringement of third-party proprietary rights, identify licensing opportunities and monitor the intellectual property owned by others. 6 We protect our proprietary rights through a variety of methods.
Intellectual Property We rely upon patents, trademarks, trade secrets and other proprietary rights to maintain and improve our competitive position. We review third-party proprietary rights, including patents and patent applications, as available, to develop an effective intellectual property strategy, avoid infringement of third-party proprietary rights, identify licensing opportunities and monitor the intellectual property owned by others.
Although we believe our proprietary technology has value, because of rapid technological changes in the medical industry, we also believe that proprietary protection is of less significance than factors such as the intrinsic knowledge and experience of our management, advisory board, consultants and personnel and their ability to identify unmet market needs and to create, invent, develop and market innovative and differentiated products. 7 Government Regulation We are registered with the FDA as a manufacturer of human cellular and tissue products (“HCT/Ps”) as well as medical devices, and we are an accredited member in good standing of the American Association of Tissue Banks (“AATB”).
Although we believe our proprietary technology has value, because of rapid technological changes in the medical industry, we also believe that proprietary protection is of less significance than factors such as the intrinsic knowledge and experience of our management, advisory board, consultants and personnel and their ability to identify unmet market needs and to create, invent, develop and market innovative and differentiated products.
Human Capital Mission, Quality Policy and Core Values Our Mission is to “honor the gift of donation, by allowing our patients to live as full, and complete a life as possible.” Through an effective quality system, we prioritize our commitment to our patients and donor families.
Additionally, we believe that our ISO 13485:2016 certification may offer new markets and business opportunities for our products in the global marketplace. 13 Human Capital Mission, Quality Policy and Core Values Our Mission is to “honor the gift of donation, by allowing our patients to live as full, and complete a life as possible.” Through an effective quality system, we prioritize our commitment to our patients and donor families.
Pharmacy benefits as well as dental, vision, life, accidental death and disability, long and short-term disability, accident, critical illness, and hospital indemnity insurance plans are available to our employees. We also offer employees wellbeing benefits through LifeBalance, Noom, and our Employee Assistance Program. Xtant prides itself on offering employment arrangements that include competitive time off policies and flexibility.
Pharmacy benefits as well as dental, vision, life, accidental death and disability, long and short-term disability, accident, critical illness, and hospital indemnity insurance plans are available to our employees. We also offer all full-time and part-time employees wellbeing benefits through LifeBalance, Calm, Burnalong, and our Employee Assistance Program.
In the future, Xtant may decide to strategically commercialize products in the United States that would require a PMA, but there are no plans to do so at the present time. 10 After a medical device enters commercial distribution, numerous regulatory requirements continue to apply.
In the future, Xtant may decide to strategically commercialize products in the United States that would require a BLA, but there are no plans to do so at the present time.
We have biologics contracts with major GPOs, as well as extensive access to integrated delivery networks (“IDNs”) across the United States for both our biologics and spine hardware products. We promote and sell our products internationally through direct sales representatives and distribution partners in Canada, Mexico, Europe, South America, Australia, and certain Pacific region countries.
We have biologics contracts with major GPOs, including Vizient, Premier, and HealthTrust Purchasing Group, as well as extensive access to IDNs across the United States for both biologics and spine hardware systems. Our international footprint includes direct sales representatives and distribution partners in Canada, Mexico, South America, Australia, and certain Pacific region countries.
We expect that additional patent applications will be filed and prosecuted as inventions are discovered, technological improvements and processes are developed, and specific applications are identified. There can be no assurance that we will be able to obtain final approval of any patents.
We expect that additional patent applications will be filed and prosecuted as inventions are discovered, technological improvements and processes are developed, and specific applications are identified.
Trademarks We have registered, and continue to seek registration, of trademarks and continuously monitor and aggressively pursue users of names and marks that potentially infringe upon our registered trademarks.
There can be no assurance that we will be able to obtain final approval of any patents. 7 Trademarks We have registered, and continue to seek registration, of trademarks and continuously monitor and aggressively pursue users of names and marks that potentially infringe upon our registered trademarks.
In addition, it is possible that future legislation, regulation or coverage and reimbursement policies of third-party payors will adversely affect the demand for Xtant products or the ability to sell them on a profitable basis. 13 Internationally, reimbursement and healthcare payment systems vary substantially from country to country and include single-payor, government-managed systems as well as systems in which private payors and government managed systems exist side-by-side.
In addition, it is possible that future legislation, regulation or coverage and reimbursement policies of third-party payors will adversely affect the demand for Xtant products or the ability to sell them on a profitable basis.
Healthcare Fraud and Abuse Healthcare fraud and abuse laws apply to Xtant’s business when a customer submits a claim for an item or service that is reimbursed under Medicare, Medicaid or most other federally-funded healthcare programs.
Some countries accept MDSAP Certificates, CE Marking, and/or FDA clearances as part of their medical device marketing approval process, 11 Healthcare Fraud and Abuse Healthcare fraud and abuse laws apply to Xtant’s business when a customer submits a claim for an item or service that is reimbursed under Medicare, Medicaid or most other federally-funded healthcare programs.
It is a minimally invasive, modular interspinous fusion system with angled spikes that allows for adequate L5 − S1 engagement and other variations in patient anatomy.
Thoracolumbar Products ● The Axle-X Interspinous Fusion System is an internal fixation device for spinal surgery in the non-cervical spine (T1 − S1 inclusive). It is a minimally invasive, modular interspinous fusion system with angled spikes that allows for adequate L5 − S1 engagement and other variations in patient anatomy.
Our Spinal Implant Products We offer a comprehensive line of products that are used to treat a variety of spinal and sacroiliac conditions, including trauma, degeneration, deformity and tumor, including use of minimally invasive surgery techniques.
Its unique formulation combines our PurLoc® Fiber Technology and superior handling properties and is designed to deliver dependable performance for reliable outcomes. 4 Our Spinal Implant Products We offer a comprehensive line of products that are used to treat a variety of spinal and sacroiliac conditions, including trauma, degeneration, deformity and tumor, including use of minimally invasive surgery techniques.
Medical Devices The Center for Devices and Radiological Health regulates the clearance and approval of conventional medical devices, such as our spinal hardware, as well as some of the HCT/Ps that are also regulated as medical devices, such as our OsteoSelect DBM putty.
Medical Devices The Center for Devices and Radiological Health oversees the clearance and approval of medical devices, including our stabilization and fusion products, as well as certain HCT/Ps regulated as medical devices, such as our OsteoSelect DBM putty.
Our Orthobiologics Products Our biomaterial products include OsteoSponge, OsteoSponge SC, OsteoSelect DBM putty, OsteoSelect Plus DBM putty, OsteoWrap, and our line of 3Demin products, as described below, as well as other allografts: ● OsteoSponge is a form of demineralized bone matrix (“DBM”) made from 100% human bone.
We provide devices in both the fixation and motion preservation categories of the spine implant market and via both surgical methodologies. 3 Our Orthobiologics Products Our biomaterial products include OsteoSponge, OsteoSelect DBM putty, OsteoSelect Plus DBM putty, OsteoWrap, OsteoVive, OsteoFactor, our line of 3Demin products and our nanOss family of products, as described below, as well as other allografts: ● OsteoSponge is a form of demineralized bone matrix (“DBM”) made from 100% human bone.
While the intent of these four key growth initiatives is to increase our future revenues, no assurance can be provided that we will be successful in implementing these growth initiatives or increasing our future revenues. Recent Acquisitions Coflex and CoFix Product Lines On February 28, 2023, we acquired all of the issued and outstanding capital stock of Surgalign SPV, Inc.
While the intent of these four key growth initiatives is to increase our future revenues, no assurance can be provided that we will be successful in implementing these growth initiatives or increasing our future revenues.
The system offers a broad range of implants and instruments, providing the ability to tailor treatment to a specific patient. Sacroiliac Joint Products ● The Silex Sacroiliac Joint Fusion System is a sacroiliac fixation system which actively compresses across the SI joint. Sacroiliac dysfunction is increasingly recognized as a frequent contributor to chronic low back pain.
Sacroiliac Joint Products ● The Silex Sacroiliac Joint Fusion System is a sacroiliac fixation system which actively compresses across the SI joint. Sacroiliac dysfunction is increasingly recognized as a frequent contributor to chronic low back pain. Interbody Products ● Calix is a family of polyetheretherketone, or PEEK, interbody spacers and precision instruments for both cervical and thoracolumbar applications.
We also maintain a national accounts program to enable our agents to gain access to IDN hospitals and through GPOs. We have biologics contracts with major GPOs, including Vizient, Premier, and HealthTrust Purchasing Group, as well as extensive access to IDNs across the United States for both biologics and spine hardware systems.
We have biologics contracts with major GPOs, as well as extensive access to IDNs across the United States for both biologics and spine hardware systems.
Our primary competitors include Medtronic plc, Johnson and Johnson, Zimmer Biomet Holdings, Inc., Stryker Corporation, Nuvasive, Inc., Bioventus Inc., Globus Medical, Inc., SeaSpine Holdings Corporation, OrthoFix Medical Inc., Alphatec Holdings, Inc., ZimVie Inc., SI-Bone Inc., as well as dozens of privately-owned companies.
Our primary competitors include Medtronic plc, Johnson and Johnson, Zimmer Biomet Holdings, Inc., Stryker Corporation, Bioventus Inc., Globus Medical, Inc., OrthoFix Medical Inc., Alphatec Holdings, Inc., Highridgek Inc., SI-Bone Inc., as well as dozens of privately-owned companies. We also compete with tissue banks that do not offer spinal fixation products, such as AlloSource International, Inc., LifeNet Health, and MTF Biologics.
Satisfaction of FDA PMA requirements typically takes years, and the actual time required may vary substantially based upon the type, complexity, and novelty of the device or disease.
Satisfaction of FDA PMA requirements typically take years, and the actual time required may vary substantially based upon the type, complexity, and novelty of the device or disease. We currently market Coflex Interlaminar Technology under the PMA approval pathway. After a medical device enters commercial distribution, General Controls for Medical Devices apply.
Our fixation products and instrumentation systems are regulated as medical devices and therefore are subject to extensive regulation by the FDA, as well as by other domestic and international regulatory bodies. These regulations govern multiple activities that Xtant and our suppliers, licensors and partners perform and will continue to perform.
Our stabilization and fusion products, along with our instrumentation systems, are classified as medical devices and are therefore subject to rigorous regulation by the FDA, as well as by other domestic and international regulatory authorities. These regulations apply to a wide range of activities carried out by Xtant and our suppliers, licensors and partners both now and in the future.
The combination of viable cells, growth factors and DBM fibers results in an allograft containing higher concentrations of growth factors than other cellular allografts. ● The nanOss family of products provides osteoconductive nano-structured hydroxyapatite and an engineered extracellular matrix bioscaffold collagen carrier to provide a natural bone growth solution.
Our proprietary processing methods protect the native elements of bone, including growth factors and viable cells, while our PurLoc fiber technology creates beneficial handling characteristics. ● The nanOss family of products provides osteoconductive nano-structured hydroxyapatite and an engineered extracellular matrix bioscaffold collagen carrier to provide a natural bone growth solution.
Our employees are eligible for paid holidays effective immediately upon hire. Paid time off is available to all corporate employees and accrue based on length of service, and sick time is available for all commercial-sales employees. 15 Employee Engagement We provide all employees with the opportunity to anonymously share their opinions and feedback directly with senior management and human resources.
Xtant prides itself on offering employment arrangements that include competitive time off policies and flexibility. Our employees are eligible for paid holidays effective immediately upon hire. Paid time off is available to all corporate employees and accrue based on length of service, and sick time is available for all commercial-sales employees.
As of December 31, 2023, our biologics patent portfolio included 50 issued patents, 26 of which are issued U.S. patents, and 3 pending U.S. patent applications. Our fixation portfolio is patent protected globally and includes 260 issued patents, 180 of which are issued U.S. patents, and 16 pending patent applications, 7 of which are U.S. patent applications.
As of December 31, 2024, our biologics patent portfolio included 50 issued patents that expire between 2028 and 2041, 26 of which are issued U.S. patents.
Our international footprint includes direct sales representatives and distribution partners in Canada, Mexico, South America, Australia, and certain Pacific region countries. Additionally, as a result of our recent acquisitions, we gained distribution partners in the European Union in 2023. Our European Union business is based in Wurmlingen, Germany.
Additionally, as a result of our August 2023 Surgalign Holdings asset acquisition, we gained distribution partners in the European Union. Our European Union business is based in Wurmlingen, Germany.
Employee Safety, Health and Wellness We are committed to maintaining a safe workplace and promoting the health and wellness of our employees. We have an employee Health & Safety Committee that is comprised of employees and recommends improvements in furtherance of employee health and safety.
We have an employee Health & Safety Committee that is comprised of employees and recommends improvements in furtherance of employee health and safety. We also have implemented multiple safety programs and regularly perform safety hazard evaluations within our manufacturing facility.
Failure to comply with applicable requirements may subject a device and/or its manufacturer to a variety of administrative sanctions, such as FDA refusal to approve pending PMAs, issuance of warning letters, mandatory product recalls, import detentions, civil monetary penalties, and/or judicial sanctions, such as product seizures, injunctions, and criminal prosecution.
Non-compliance with these requirements can result in administrative actions such as FDA refusal to approve pending PMAs, 510(k)s, issuance of warning letters, mandatory product recalls, import detentions, civil monetary penalties, and/or judicial sanctions, such as product seizures, injunctions, and criminal prosecution. 9 Under the FDCA, medical devices are classified into one of three classes based on the risk associated with the device and the level of control necessary to provide a reasonable assurance of safety and effectiveness.
We have focused and intend to continue to focus primarily on four key growth initiatives: (1) introduce new products; (2) expand our distribution network; (3) penetrate adjacent markets; and (4) leverage our growth platform with technology and strategic acquisitions.
Our strategic focus is currently on digesting and growing the products and businesses we have acquired, producing our own stem cells, growth factor, amnio and synthetics biologics products, and continuing to focus on the following four key growth initiatives: (1) introduce new biologics products, including our Cortera ® Spinal Fixation System, viable bone matrix, OsteoVive ® Plus, and amniotic membrane allografts, SimpliGraft ® and SimpliMax™; (2) leverage our distribution network; (3) penetrate adjacent markets; and (4) leverage our growth platform with technology and strategic acquisitions.
Submissions are analyzed to enhance the employee experience, promote retention, drive change, and leverage the overall success of our organization. Employee Development and Training We recognize that successful execution of our strategy is dependent on attracting, developing and retaining top talent in all areas of the business.
We create opportunities for connection to the Company mission through events, communications, and programs, highlighting the significance of the work being done, fostering stronger employee relationships, and showing appreciation through employee recognition. Employee Development and Training We recognize that successful execution of our strategy is dependent on attracting, developing and retaining top talent in all areas of the business.
It is intended for use on all levels of the lumbar spine for back pain and intervertebral disc-related pain due to degenerative processes of the lumbar spine with the occurrence of instability. 5 Future Products In the near term, we plan to introduce a synthetic putty for bone graft applications; the BMAC System, a cell concentration system; and Cortera, a rod pedical screw system that has both open and minimally invasive modules.
It is intended for use on all levels of the lumbar spine for back pain and intervertebral disc-related pain due to degenerative processes of the lumbar spine with the occurrence of instability. Sales and Marketing We distribute our products in the United States through an extensive distribution network of commissioned independent sales agents and stocking agents.
The laws and regulations govern, among other things, the design, manufacture, storage, recordkeeping, approval, labeling, promotion, post-approval monitoring and reporting, distribution and import and export of medical devices.
In the United States, medical devices are heavily regulated by the FDA under the Federal Food, Drug, and Cosmetic Act (“FDCA”) and its associated regulations, as well as other relevant federal and state laws. These regulations cover various aspects, including design, manufacture, storage, record control, approval, labeling, promotion, post-approval monitoring and reporting, distribution and import and export of medical devices.
This final rule does not go into effect until February 2026. 11 International Regulation Many foreign countries have regulatory bodies and restrictions similar to the FDA. International sales are subject to foreign government regulation, the requirements of which vary substantially from country to country.
This final rule does not go into effect until February 2026. International Regulation International distribution is governed by foreign government regulations, which can vary between countries. The time needed for approval in a foreign country may be longer or shorter than that required for FDA approval process, and the specific requirements may differ.